v6.31 Firmware
IMPORTANT NOTES:
BEFORE INSTALLING: please read the release notes and brief top-level tutorial which can be found as a PDF file in the download section.
IMPORTANT NOTES (from v5.xx or below):
- Make a backup of your programming before proceeding.
- It is recommended that you load V6.xx firmware with your existing editor. Then update your editor.
- DO NOT update your drivers. They haven't changed.
RECOMMENDED UPGRADE PROCESS (from firmware v5.xx or below):
- Use currently installed editor to load firmware V6.00+
- Close the editor and uninstall.
- Install lastest V6 editor available
- Upon connecting to a LF+ that was updated to V6.x for the first time, the editor should automatically detect such event and install INTERNAL DATA UPDATE.
- If you did not see the message in #4 above, you can manually do this process. Only do it once. Go to [HARDWARE] menu, and select the option [SPECIAL - UPDATE INTERNAL DATA]
- You are now on the new v6 platform for the LF+ Series MIDI Controllers.
V6.31 Release Notes:
NEW: internal updates / enhancements
FIX: EXP PEDAL : [EXPR SEND VALUE] expression pedal Resend Value Programming Command not always triggered properly
FIX: EXP PEDAL : [EXPR RESEND CURRENT] expression pedal Resend Current Programming Command not always triggered properly
FIX: SETLIST : Cycle parameter [TOP -> 1st Song] not functioning properly under certain conditions
FIX: SETLIST : Cycle parameter [BOTTOM <-> TOP] not functioning properly under certain conditions
FIX: KEMPER : IA-SLOT : Performance mode Sync would show wrong active Performance Slot when above Bank 1
FIX: KEMPER : IA-SLOT : MOD sync not functioning properly under all circumstances
FIX: KEMPER : IA-SLOT : DELAY sync w/ spillover not working properly
FIX: KEMPER : IA-SLOT : REVERB sync w/ spillover not working properly
FIX: PRESET SAVE: Menu button colors are not properly displayed under certain circumstances
MOD: AXE-FX III : IA-SLOT : Chan Sync : Button LCD will be off (no color) for a channel selection IA-Slot when the underlying effect is not present in the active AXE-FX preset.
MOD: KEMPER : Effect labels for button label display updated through Kemper Firmware 7.3.2.x [Editor v6.31 will install update for (D4: E:177 -> D4: E:183)]
v6.22 Release Notes
* some features require v6.21+ editor for update. Editor coming shortly.
FIX: AXE-FX III : Setting initial IA-Slot states for AXE-FX III CHAN SYNC within preset not always forcing chan state when IA-Slot's Sync is set to initial preset resend.
FIX: AXE-FX III : Scene name not properly updated when disconnected from live AXE-FX III Sync
FIX: Display : 2nd Function items not displayed on button LCD properly under certain conditions
FIX: Display : Certain items not displayed on Main LCD under certain conditions
FIX: MIDI CLOCK : LF+ will properly transmit from 50bpm -> 255bpm MIDI BEAT CLOCK.
MOD: Display : Song / Setlist Mode -> Song will display immediately when switching between songs
MOD: Expression Pedals: improved response engine
MOD: KEMPER : new kemper v5.5.x reverb modifications handled by LF+
MOD: KEMPER : when editor v6.21+ is connected a first time, new internal data will be sent to update reverb
MOD: TUNER : Tuner will now exit when any expression pedal (or Exp Pedal button extender) is moved/pressed
MOD: EXPANDER : v6 platform functionality out of beta in this release. Full expander capabilities available.
MOD: EXPANDER : New subsystem update. SEND YOUR MASTER PROGRAMMING FILE W\ SUPPORT TICKET IF REPORTING ANY PROBLEM.
MOD: Double-Tap Button: Buttons w/ 2 functions set as double tap respond quicker.
v6.20 Release Notes
NEW: SONG : new parameter - Resend Programming commands with each preset Retrigger.
NEW: KEMPER : Delay and Reverb sync now allows selection of either No Spillover or Spillover versions w/ additional parameter in Sync Effect section of IA-Slot
NEW: SYSEX MESSAGES : New PRE Message Link - will send a defined sysex message BEFORE the message contained. Use as a common HEADER as example
NEW: SYSEX MESSAGES : New POST Message Link - will send a defined sysex message AFTER the message contained. this replaces the [Message Link] function in older firmware. POST LINKS can have their own PRE and POST links. Be careful not to create infinite loops of messages!
NEW: SYSEX MESSAGES : a value = 255 (FF) contained within an F0....F7 block of data will be replaced with a CHECKSUM value automatically calculated from the message being sent
NEW: SYSEX MESSAGES : a value = 255 (FF) contained outside of an F0....F7 block will stop sending data for that systex message
MOD: SYSEX MESSAGES : not allowed to Pre/Post link to itself. This would cause circular loop that would never end
MOD: CMD: Preset Momentary then Jump: This command now allows either an actual preset, or a specific preset slot location defined within the active song
MOD: AXE-FX III SYNC : LF+ will correct and transmit AXE-FX III sync information even if the AXE-FX III is not transmitting back to the LF+ and the LF+ is not configured correctly
MOD: TUNER : If global guitar tuner setting [blk display = OFF], all buttons will go dark when out of tune and green when in tune.
MOD: KEMPER : REVERB will sync when assigned to a stomp A->D effect slot
FIX: AXE-FX III SYNC : Channel Selection from IA-Slots not properly processed when button start value was not 1
FIX: AXE-FX III SYNC : Channel Selection IA-Slot states not properly processed under certain conditions when effect was not placed in layout
FIX: PRESET : IA-Resend with certain external sync effects not processed correctly
FIX: PRESET : IA-Resend may function irratically under certain conditions
FIX: IA-MAP USAGE : Under certain conditions an IA-Slot may not sync properly
FIX: CMD:Page Change : Under certain conditions this programming command could cause an IA-Slot to double press
FIX: TAP TEMPO : TAP RANGE for All programming commands corrected to 50BPM -> 240bpm and 250ms -> 1200ms
FIX: PRO+ MODEL : Certain external sync operations could block the display of the button functions
FIX: System Level : Various internal modifications and corrections
MISC: expander : Final expander related items will be updated in V6.21
MOD: 2nd FUNC Display : If global setting [Show 2nd Func name] is turned on, buttons with only 1 function will show full 1 function display
v6.07 beta changes since v6.05 beta
-------------------------------------------
FIX: PRESET : IA-Resend with certain external sync effects not processed correctly
FIX: PRESET : IA-Resend may function irratically under certain conditions
FIX: IA-MAP USAGE : Under certain conditions an IA-Slot may not sync properly
FIX: TAP TEMPO : TAP RANGE for All programming commands corrected to 50BPM -> 240bpm and 250ms -> 1200ms
FIX: PRO+ MODEL : Certain external sync operations could block the display of the button functions
FIX: System Level : Various internal modifications and corrections
FIX: AXE-FX III SYNC : Channel Selection from IA-Slots not properly processed when button start value was not 1MISC: expander : Final expander related item will be updated in V6.10 (full public release version)
MOD: 2nd FUNC Display : If global setting [Show 2nd Func name] is turned on, buttons with only 1 function will show full 1 function display
NOTES: AXE-FX III PRESET IA-SLOT STATE SYNC NOTES: (Preset parameters and their resulting behavior)
- [PRESET : SYNC IA STATE parameter = ON]
[PRESET : RESEND INITIAL IA STATE parameter = OFF]
[IA-SLOT: PRESET INITIAL RESEND = ON or OFF]
OR
- [PRESET : SYNC IA STATE parameter = ON]
[PRESET : RESEND INITIAL IA STATE parameter = ON]
[IA-SLOT: PRESET INITIAL RESEND = OFF]
BEHAVIOR: Current effect states within the AXE-FX III preset will be used to update the LF+ in real-time
- [PRESET : SYNC IA STATE parameter = OFF]
[PRESET : RESEND INITIAL IA STATE parameter = ON]
[IA-SLOT: PRESET INITIAL RESEND = ON or OFF]
BEHAVIOR: Current effect state settings within the LF+ Preset will update the AXE-FX III preset upon triggering
- [PRESET : SYNC IA STATE parameter = ON]
[PRESET : RESEND INITIAL IA STATE parameter = ON]
[IA-SLOT: PRESET INITIAL RESEND = ON]
BEHAVIOR: Current effect states within the AXE-FX III preset will be used to update the LF+ in real-time. IA-Slots
set with [PRESET INITIAL RESEND set to ON] will then update to the state defined in the LF+ Preset
---------------------------------------------------------------
v6.05 beta changes since v6.04 beta
FIX: Pages : Buttons set as TYPE TRIGGER did not always operate as expected in under some conditions with sync'd IA-Slots
FIX: Pages : Button Labels not always properly displayed with Global setting: [Show 2 line Function Name] when Sync'd externally to AXE-3 SCENE or certain other effects
FIX: AXE-FX III : Sync when IA-Slot was above 60 did not always process correctly
FIX: AXA-FX III : All Chan Selection IA-Slots processing their programming commands when any effect is triggered
FIX: AXE-FX III : LF+ System errors when certain effects are sync'd in a particular order
MOD: AXE-FX III : lowered looper display update response time
NEW: Guitar Tuner : Full Button Display of "in tune" state is now user selectable. ON by default. OFF will stop all buttons from turning GREEN when in-tune.
v6.04 beta changes since v6.02 beta
MOD: GUITAR TUNER : All Buttons on the controller will turn GREEN when IN TUNE. New screen layout to clean up the design.
FIX: IA-Slots : Some IA-Slots were disabled from processing under certain conditions
FIX: IA-Slots : Some IA-Slots were incorrectly being blocked under ceertain conditions
NEW: IA-Slots : [AXE-FX III] [EFFECT TYPE: CHANNEL SELECTOR] If IA-SLOT TYPE = STOMP then a CHANNEL SELECTION REQUEST will display on 4 buttons
NEW: IA-Slots : [AXE-FX III] [EFFECT TYPE: CHANNEL SELECTOR] If IA-SLOT TYPE = STEP then steps will control the processing utilizing the concept of cycling channels. Behavior based on parameter selection
NEW: IA-Slots : [AXE-FX III] [EFFECT TYPE: CHANNEL SELECTOR] IA-SLOT Color selections define a color for each CHANNEL.
MOD: IA-Slots : [AXE-FX III] [EFFECT TYPE: SCENE] Scene's without a name were considered unused and blocked. Now all SCENES are considered usable. Unnamed scenes in the AXE-FX III will default to the IA-Slot name/nickname
MOD: IA-Slots : [KEMPER] [EFFECT TYPE: PERF SLOT 1-5] Triggering these IA-Slots will automatically trigger a slot within a Performance. It will automatically handle MORPHING function of Kemper just by re-triggering the same IA-Slot
INFO: IA-Slots : [KEMPER] [EFFECT TYPE: TAP TEMPO] Trigger the IA-Slot one time to enable the KEMPER BEAT SCANNER. If you continue to "tap", then the Kemper will follow your tap-tempo.
MOD: Page Buttons : 2nd Function ASAP global setting now effects all button types and functions (Presets, IA-Slots, Page Selects, and Special Functions)
MOD: misc internal: a few internal updates and corrections for display processing
V6.02 beta Changes since V6.00 beta
----------------------------------
NEW: Programming Command: AXE-FX3 related: [EXT DEV CHANGE CHANNEL] command is now [EXT DEV CHANGE BYPASS/CHANNEL]. This command now allows you to change either the Channel of an Effect, or the Bypass State of an Effect.
MOD: Programming Command: [PC_UP] : MIDI CHANNEL Parameter added. LF+ can dynamically control the PC# of MIDI CHAN 1-5 independently. [PC_UP] will increment the PC# on the given channel and send the MIDI command to change program (preset).
MOD: Programming Command: [PC_DOWN]: MIDI CHANNEL Parameter added. LF+ can dynamically control the PC# of MIDI CHAN 1-5 independently. [PC_DOWN] will decrement the PC# on the given channel and send the MIDI command to change program (preset).
FIX: Button Display Updates: Under certain conditions, some types of assigned button functions would not update correctly once triggered (SONG UP/DOWN, etc...)
V6.00 System Firmware Release Notes
SYSTEM SPECIFIC NOTES
- NEW: Internal Processing Engine V6 (71 internal feature enhancements, modifications, or fixes)
- NEW: Expander engine updated for compatibility with new FAMC devices coming to market. Faster expander syncing
- NEW: KEMPER KPA Engine (See below for new firmware features)
- NEW: AXE-FX III Engine (See below for new firmware features)
- FIX / MOD: Expander System
- Forced an improper button start value on expander under certain circumstances
- Button LCD will blink when alternate controller modifies an IA-Slot. Provides quick visual indication
- NEW/ FIX / MOD: Programming Commands
- [Button Start Value] command allows full virtual button range
- [AUTO TAP TEMPO] Timing engine is now accurate to sub-millisecond in all cases
- [AUTO TAP TEMPO] Tempo speed that is out of the range of (49bpm - 300bpm)(200ms - 1224ms) will no longer default to 100bpm. It will not ignore now
- [SYSEX SEND] was able to transmit bad data if starting message didn't begin with valid MIDI value
- [EXT CHANCE SCENE] allows specific scene changes in AXE-FX 3
- [EXT CHANGE BYPASS/CHAN] allows specific channel and bypass state changes in AXE-FX3
- NEW / FIX / MOD: IA-Slot
- Parameter: Allow Preset Resend. When [ON]: [Presets set to resend IA-Slot] and [set to Sync with External Device] will process the IA-Slots programming. Default [OFF]
- TYPE [Tap-Tempo] Timing engine is now accurate to 1 millisecond
- SYNC DEVICE: AXE-FX II with SYNC EFFECT set to X/Y State. Not processed properly under certain circumstances
- Internal auto-correct programming mistakes when they appear invalid for a given IA-Slot. Trying to force steps that don't exist will auto-correct.
- IA-Slots assigned to sync with external devices can now also process any set of programming commands
- MOD: [TAP TEMPO] Valid range extended [50bpm (1200ms)] -> [300bpm (200ms)] note: below 48bpm will reset the LF+ BPM calculator (assume tapping has stopped).
- MOD: Internal updates 82 internal fixes / modifications / enhancements / performance boosts outside of the new V6.00 engine features.
- FIX: [BANK SCROLLING] Banks set to trigger scroll events no longer re-trigger presets when you reach the top or bottom bank and continue to hold the BANK DOWN/UP button.
- FIX: [PRESET EXTERNAL SYNC] Preset’s initial IA-Slot definitions from KEMPER live sync not always saved into preset Initial States when Save Parameter was ON
- NEW: [PRESET 1 TIME LIVE SYNC / SAVE] This Parameter (coming soon) will allow a live Sync to capture an external device Preset Name/ and Effects States one time and then save it into the preset. This will speed up future Preset triggering of that preset by not live sync'ing. Resetting this feature will force ALL presets to do 1:1 Sync again. So changes made to your AXE-FX or KEMPER can automatically load/save into the Preset on the next trigger.
V6.00 KEMPER related notes
NOTE TO KEMPER PROFILER USERS:
PLEASE read the release notes below. You should update your IA-Slots. Remove any programming commands for Sync'd IA-Slots. Life just got easier. Also note that there are new Functions that can sync to your IA-Slots. Performance mode controls are now automatic. The LF+ will handle all sync related functions automatically. No need to auto-load programming if you don’t want to. IA-Slots will rename themselves in real-time to follow the current PERFORMANCE you are using in the KEMPER.
THERE ARE TWO MODES OF OPERATION with the Kemper. Browser and Performance. The LF+ will switch automatically between the two modes, however, it is recommended that you create your layout specific to one of those modes. You may prefer to setup a different page for each mode.
PERFORMANCE mode features within the LF+ allow for you to assign IA-Slots to handle Performance RIG selection. IA-Slots can also be assigned to PERFORMANCE UP and PERFORMANCE DOWN. Thus, with almost no effort, you can assign those IA-Slots to a page, and then control the KEMPER live. The IA-Slots are now “intelligent” and will rename themselves in real-time to match your currently active performance in its RIG (preset) names.
LOAD THE SAMPLE programming file from Editor V6+ (File Menu). Load this into your LF+ to immediately have it become the remote control. Review the programming file for ideas on how to set things up.
The NEW SYNC engine within the editor now allows for performance and browser layouts.
- NEW: Mode Detection: The LF+ will automatically detect what mode the Kemper is in and process accordingly. You can change between modes from the Kemper itself in real-time if needed.
- NEW: IA-Slots
- EFFECT SYNC: Added PERFORMANCE MODE Rig Selection functions. This will enable automatic NAME and STATE sync for rigs of current PERFORMANCE loaded
- EFFECT SYNC: Added PERFORMANCE MODE Rig Selection functions. These IA-Slots can only be ON or OFF. Set the Colors of those two options. LF+ will auto-sync the state
- EFFECT SYNC: Added PERFORMANCE UP Selection function. This will automatically go to the next PERFORMANCE. Acting like a Bank UP command
- EFFECT SYNC: Added PERFORMANCE DOWN Selection function. This will automatically go to the next PERFORMANCE. Acting like a Bank DOWN command
- EFFECT SYNC: Added TUNER function. Automatically goes into Tuner mode
- EFFECT SYNC: Added TAP TEMPO function. Automatically triggers a Tap command to the Kemper
- NEW: KEMPER - Browse mode : Global Setting [External Follow] will update LF+ Preset Names to match
- NEW: KEMPER - Performance mode: With global Setting [PRESET NAME SOURCE] set to KEMPER, the LF+ will sync in real-time without the LF+ changing its own preset. This allows "remote control" layouts with your Kemper. Use IA-Slots set to SYNC with your Performance RIG SLOTS 1-5, and use the PERF UP and PERF DOWN sync effects on 2 other IA-Slots. You now have full remote control with no further programming required. In the editor [File] menu, select the sample factory Kemper_Sync_Performance_Remote programming. This will load a 100% complete programming file into your LF+. Select the page layout based on the model of LF+ you have. The sample includes a layout for Mini/JR+, 12/12+, and Pro+ models.
IMPORTANT KEMPER RELATED NOTE: V6.00+
- 6.00+ no longer requires programming commands for IA-Slots that are SYNC'd to a KEMPER effect or function. Once you program the IA-Slot to Sync, the LF+ will process and sync automatically. You may add other programming commands to the ON and BYPASS command area, however, you should not program any KEMPER related commands to trigger the function you are sync'ing. If you are not controlling any other devices with these IA-Slots, then set all commands to "EMPTY".
- Programming files created with firmware prior to V6.00 will most likely contain KEMPER related midi commands. Prior firmware will still require those midi commands. V6.00 will transmit redundant commands if you don't clean out the programming commands. You should clear out any KEMPER midi messages related to the effect you are sync'ing. Note that once you make these changes to your programming file, those IA-Slots will no longer function properly with firmware prior to V6.00. The programming files will load fine, however, no KEMPER activity will occur given the missing MIDI commands.
- Kemper Remote Control Emulation programming file will configure the Editor with a complete set of programming that gives you access to most of the KEMPER Effects IA-Slots pre-programmed. It also includes a page that is configured to immediately allow the LF+ to control the Kemper while in Performance Mode, in real-time. The default page is configured so that Buttons 1 and 5 scroll up/down through performances. Buttons 2,3,4,6 and 7 are assigned the 5 performance RIG slots. Each of the performance buttons will automatically update with the current RIG (preset) defined in the performance. You can trigger and manage in real-time. The LF+ will automatically show the performance name, and automatically assign the Rig Slot IA-Slots with the actual names in real-time. The buttons will automatically stay in sync so you know which RIG (preset) is currently active.
V6.00 AXE-FX related notes
NOTE TO AXE-FX III USERS:
Please note that the AXE-FX III engine is automated. This is unlike your probable experience with AXE-FX/AXE-FX II setup in the LF+. All Sync'd effects in an IA-Slot are automated. There is NO reason to enter programming commands. If you are migrating from AXE-FX I/II type devices, then do the following to your programming:
- For each sync'd IA-Slot, change the SYNC Device to AXE-FX III. Then select the Effect from the Effect List. Notice you can assign Effects, SCENE1-8 control, TAP-TEMPO and TUNER. NO PROGRAMMING is needed once these options are selected. Remove any MIDI commands or external SYNC commands. For the AXE-FX III, assigning the SYNC EFFECT / FUNCTION, and TYPE is all that is needed.
- If you change an AXE-FX I/II sync of SCENE1 - SCENE8, remove any midi commands, external sync commands, or grouping of those IA-Slots. The LF+ will handle everything automatically. It will rename those scenes in real-time as well as you change presets. No programming is required from you.
- No G-Tuner command is needed unless you don't sync an IA-Slot to TUNER from the Effect Drop Down List.
Load the sample AXE-FX III programming file from the editor's [FILE] menu. This will create a programming template for you to look at and modify as you wish. It will sync and work as is with no further programming. A handful of effects are assigned to IA-Slots. Some are BYPASS related, others are CHAN SELECTION IA-Slots. This will give you an idea of how easy it is to program. Notice that no programming commands are needed for the AXE-FX III.
IF YOU ARE STARTING NEW with an AXE-FX III
Once you have V6.00 of the editor installed and connected to the LF+. Go to [EXTERNAL DEVICES] MENU and select the Sync option. Enter your desired installation type from the drop down menu. Make sure you have the "Auto Program IA-Slots" turned on. The Sync will find every Effect that you have in all of your presets within the AXE-FX III and auto-program them into the system for you.
You may allow the External Sync in the editor to auto program the IA-Slots for you, however, you will have more control if you pre-program your IA-Slots. For those Slots you would like to control the CHANNEL of an EFFECT, the Sync will automatically store the correct channel information into presets if you have defined those IA-Slots ahead of time.
In the [FILE] menu, there is a new factory programming file for the AXE-FX III. Select this option and the editor will program itself with various AXE-FX III capabilities. In fact, you can load this into your LF+ and you will have full live sync control without any further effort. Review the programming in this setup. You will see how to control CHANNELS, EFFECTS, SCENE's and more.
V6.00 AXE-FX III related notes:
- NEW: Smart Sync: The LF+ will automatically control the AXE-FX III with no additional programming once you select an Effect to Sync
- NEW: SCENE NAME DISPLAY will automatically display with the Main Preset Name if the Global Settings: [PRESET NAME SOURCE] is set to AXE-FX
- NEW: IA-Slot - SYNC EFFECT: [TUNER] If SYNC'd to EFFECT 'TUNER' for AXE-FX III, it will automatically handle all programming. Leave the IA-Slot command programming Empty
- NEW: IA-Slot - SYNC EFFECT: [TAP-TEMPO] if SYNC'd to EFFECT 'TAP TEMPO' for AXE-FX III, it will automatically handle all programming. Leave the IA-Slot command programming Empty
- NEW: IA-Slot - SYNC EFFECT: [SCENE 1]->[SCENE 8] if set to sync with a SCENE, it will automatically handle all programming/sync and rename the IA-Slot in real-time. Leave command programming Empty
- NEW: IA-Slot - SYNC EFFECT: [LOOP <functions>] the LF+ will automatically handle all programming/sync in real-time. Leave the command programming Empty
- NEW: IA-Slot - SYNC EFFECT TYPE: Either control the bypass state of the chosen Effect, or control/display the CHANNEL of the chosen effect.
- NEW: IA-Slot - SYNC TYPE CHANNEL: Parameter [CHAN CYCLE RANGE] will allow you to limit changes to: CHAN A only, CHAN A/B, CHAN A/B/C, or All Channels
- NEW: IA-Slot - SYNC TYPE CHANNEL: Will automatically cycle through channels each time the IA-Slot is triggered. Control of which channels are cycles is available via parameter [CHAN CYCLE RANGE]
- NEW: IA-Slot - SYNC TYPE CHANNEL: Using an IA-Slot TYPE: [STEP], combined with a SYNC EFFECT CHANNEL setting, the LF+ will automatically trigger the step programming associated with the active CHANNEL of the assigned effect. Triggering the IA-Slot will automatically select the next CHANNEL in the AXE-FX3. STEPS allow sophisticated control with channel selection.
- NEW: IA-Slot - When multiple IA-Slots Sync to the same effect, only the triggered IA-Slot will execute its commands. This allows multiple IA-Slots to remain in sync with each other, but process differently. Works with both BYPASS and CHAN SELECTION type Sync. ANY switch type combination is allows (Steps, Stomp, etc...)
- NEW: Programming Command: [CHANGE EXT DEVICE BYPASS/CHANNEL] Forces a particular effect into a particular channel or State.
- NEW: IA-Slot - SYNC EFFECT display: All Sync'd effects will display the current CHANNEL on the second line of button LCD when not using [2 function display] global setting.
- NEW: IA-Slot - SYNC EFFECT display: All Sync'd SCENE effects will automatically update the displayed names of scenes. no programming is required other then selecting the Sync Effect desired.
- NEW: EXPRESSION PEDAL HEEL/TOE IA-Slot triggering. Heel and Toe triggers for each Expression pedal can now include IA-Slot types: STOMP, QUICK-Tap and Tap-Tempo. Momentary and STEP IA-Slots are not allowed. Sync'd IA-Slots will not process as sync'd slots to avoid midi loops that can be caused by certain external effects devices.
VIEW RELEASE NOTES via PDF file for Pictures and further descriptions of new features.
PREVIOUS FIRMWARE RELEASE NOTES:
5.10
----
FIX: PAGES: (With [DYNAMIC IA] parameter turned on): Buttons assigned with a functions other than an IA-Slot would not always cycle functions properly.
FIX: COMBO-BUTTON BLOCKING: under certain conditions the combo blocking (menu, preset, page, Save/Copy) settings were ignored on power-up.
FIX: PRESET: ([ALLOW MULTI-PRESS] parameter turned off): Preset would allow certain processing to occur on multiple presses of the preset even when this parameter was turned OFF. Presets with STEPS, or presets that are desired to re-Process/Reset IA-States should have the [ALLOW MULTI-PRESS] parameter turned ON. This fix will block all processing on the currently activated preset after its first press when the parameter is not turned off.
**** NOTE: If your presets no longer re-trigger as they did before, then you may need to properly set this parameter. You can quickly reprogram all presets not properly set to ON by turning ON the parameter in a preset, then Right Click the mouse button on that parameter and select [copy to all presets].
FIX: GUITAR TUNER: Expander did not trigger properly under certain conditions once Tuner was started.
MOD: GUITAR TUNER: Expanders now display GUITAR TUNER information in real-time when the Master is in TUNER mode. Master/Expander(s) can exit tuner mode with the push of any button.
MOD: GUITAR TUNER: MIDI channel assignment now available. Useful when the tuner device is not on MIDI CHAN #1.
MOD: PRESET: If [PROCESS PRESET COMMANDS AFTER IA's] parameter is turned ON, a multi-press of the active preset will also trigger the preset commands after all IA-Slots/RESET INITIAL STATES are processed.
MOD: EXPRESSION PEDALS: Pedal processing engine update. Potential latency issues removed on all functions. NOTE: for 1 and 2 button functions, you must use good quality switches/connections ( Such as the FAMC BE1, BE2 modules). The new engine was updated for speed and functionality. It requires quality made modules for optimal integration and function.
MOD: SYSTEM: Enhancements / Performance improvements across entire system
5.05
----
- NEW: GUITAR TUNER: Allows Midi Chan selection in global settings. Defaults to MIDI CHAN #1
- FIX: Programming Command: BUTTON START VALUE was not working properly in v5.04 under all circumstances
5.04
----
NOTE 1: VERSION 5 platform. This release will contain all internal updates for the new v5.X platform. With this release there are no known bugs remaining. All internal engines are fully updated and will remain as is for a long time to come. It is recommended that everyone update to this v5.03. ENJOY.
MOD: Preset Selection via B1+B5 will now sync when required
MOD: Priority of Button scribble strip labels for IA-Slots: (1) PRESET MAP LABELS when enabled and the slot exists, (2) IA-Slot LABELS when Preset has defined label and the IA-Slot is configured to show labels, (3) Nick Name of IA-Slot.
MOD: Editor v5.03+ can exit the LF+ from editor mode when completed
FIX: EXPANDER could go into constant loops in very rare instances
MISC: Final internal processing engine updates for v5.X platform
MISC: Switcher engine enabled for X16A/X8A switcher
5.02
----
**NOTE 1: install V5.00+ of editor to utilize new features of this firmware. Not all features of V5.00 are accessible via the LF+ hardware menu system at this time.
**NOTE 2: After installing firmware V5.00+ for the first time, please connect the LF+ to the editor (V5.00+) and select "SPECIAL: Clear MAP labels" from the Hardware Menu. When that process is complete, follow by selecting "SPECIAL: Clear Song Preset Labels" from the Hardware Menu. ONLY DO THIS PROCESS ONE TIME. It will erase the labels to factory default values (empty). Without doing this, your LF+ may have garbled labels until this process is completed.
NEW: Preset: Parameters- Allows BLOCK of individual expression pedal transmission as an initial state. Setting the block EXP parameter will block transmission of a particular expression pedal until either (1) an unBLOCK programming command is executed, or (2) any of the EXP_... programming commands are executed (EXP MIDI, EXP CC, and so on). Once an expression pedal override command is executed, the block is removed from the pedal. An EXP BLOCK programming command can be issued to temporarily block the pedal again.
NEW: Preset: Parameters- IA Slot MAP LABLES: You can now define Labels to be displayed on the button LCD's for the first 20 IA-Slots of the current IA-MAP loaded. The labeling priority of the LF+ system is (1) MAP LABEL (NEW), (2) IA-Slot LABEL definition, (3) Nick-Name of IA-Slot. If a label is not defined for a particular slot (1-20), then IA-Slot LABELs or Nicknames will be used. "Not defined label" is a label with a space character as the first character or all spaces for the label name (empty). Map labels differ from IA-Slot Labels. Each Preset has 10 labels which define the Button LCD label displayed for a matching IA-Slot with a label setting within the IA-Slot itself. Map labels are defined at the preset level, and correspond to whatever IA-Slot is defined within the current IA-Map loaded for the preset. Within the editor, the first 20 Initial IA-Slot settings now contain the label definition area.
NEW: Song: Parameters- The first 12 presets within the song can have a custom label displayed on Button LCD's instead of using the preset's nickname. If the "Use Label" parameter is turned on, then this label will be displayed if it is defined (not empty or all space characters). If no label is defined for a particular preset slot within the song, then the preset's nickname will be used as is the default behavior.
NEW: Song: Parameter- "Use Labels". Turn this switch on to allow a song to use defined labels for the first 12 preset slots.
MOD: PAGE: IA-TRIGGER on page will now allow STOMP, MOMENTARY, QUICK-TAP type IA-Slots to be triggered.
FIX: EXPANDER: initial power up sync with master handles full system status and will block corrupted data issues.
FIX: EXPANDER: initial page not always following the master's settings upon power-up.
FIX: PROGRAMMING COMMAND: SET IA STEP : was not properly processed under all permutations of combined programming commands.
FIX: GUITAR TUNER: Will properly handle MIDI THRU when this parameter is turned ON in the global settings.
MISC: Internal update to the expander sync system.
4.90
----
NEW: GROUP processing of IA-Slots: STEP type IA-Slots can now be included within GROUPS. When another IA-Slot in a group is triggered, Step Type IA-Slots will reset to Step #1 automatically.
NEW: IA-TRIGGER programming command now supports group based IA-Slots. Prior use of this command would only trigger an IA-Slot and not process grouping. This only happens when the IA-Slot being triggered is contained within the currently loaded IA-MAP.
NEW: SET STEP STATE programming command can now trigger IA-Slots that are grouped. When grouped, the trigger will update grouped IA-Slots as well.
NEW: Programming Command: EXP TEMP BLOCK -- you can temporarily block an expression pedal from sending CC#'s until either an UNBLOCK command is processed, or any of the EXP modified programming commands is updated with a new value
NEW: Programming Command: EXP TEMP UNBLOCK -- will unblock a blocked expression pedal. This can be used if you are not modifying the output parameters.
FIX: Internal processing cleanup.
FIX: IA-Slots assigned a group, and used multiple times within an single IA-MAP will now function properly on either IA-MAP slot.
NOTE: All beta functions in v4.84-V4.85 are now considered production. Update to V4.90+ if currently using V4.84-V4.85. Bugs, issues, or incomplete implimentation of any of those functions have been addressed and each feature is now considered complete in this production release.
4.85 (replace v4.80-v4.84 with this release to solve beta feature bugs)
----
**NEW**: LF+ will now maintain the current state of ALL IA-SLOTS (1-180). If you change Pages or IA-MAPS, the LF+ will maintain the active and current state (ON, OFF, BYPASS, BLOCKED) of all IA-Slots instead of resetting each IA-State. For IA-Slots not used within a given IA-MAP, such IA-SLOT will not be modified nor cleared. This last known state will be retrieved when the IA-Slot is again used via Page / IA-MAP change
NEW: Kemper / AXE-FX Sync: All IA-Slots are now updated in real-time, regardless of current IA-Map in use. Switching Pages/IA-Maps will not lose the most recent state of each sync'd effect
NEW(): Programming Command: IA RESEND - will resend a specific IA-Slot #(1-180). The original IA Resend command has not changed function and will resend the IA-Slot defined in the specific IA-MAP slot #. Will trigger (resend commands) for STOMP and QUICK-TAP type IA-Slots only
NEW(): Programming Command: IA TRIGGER - will set a specific IA-Slot #(1-180) to a defined state (OFF, ON, BYPASS, BLOCKED). The original IA TRIGGER ON, OFF and TOGGLE commands have not changed function and will trigger the IA-Slot defined in the specific IA-MAP slot #. This will change the state as allowed for any type of IA-Slot, but will only TRIGGER (resend commands) for STOMP and QUICK-TAP type IA-Slots
NEW: GLOBAL SETTING: IA-STATE CHANGE DISPLAY STYLE: (when in SONG/SETLIST MODE): by default the Main LCD will show IA-Slot state changes. The user can now choose a type: Static display (default), Delayed reset (will show the change, then redisplay Song name after a few seconds), No display (will not display IA-State changes on Main LCD)
NEW: AXE-FX Sync: IA-Slots set to sync with SCENE can be blocked at the Preset level using initial IA-States which will prohibit the scene IA-Slot from being usable
MOD: Expanders: internal modifications for sync update activities
MOD: Expanders: Master controller sets the values of Blocked Button combinations (menu, Save/Copy, Page, Presets) for expanders
MOD: Page change commands will display the page name briefly on the Main LCD and will then redisplay the current SONG name when in SONG/SETLIST mode
MOD: IA TRIGGER commands: Originally allowed only one trigger command per IA-Slot to process. Now multiple IA TRIGGER commands will process per IA-Slot
FIX: Select Page function was not displaying correctly on button LCDs
FIX: Select Page function would not always trigger when assigned to page buttons under certain conditions
FIX: When creating programming commands, several of the commands were not properly updating valid parameters on the screen when editing within the LF+
FIX: Button Start Value limitation in global settings
FIX: IF IA... programming commands would not properly execute under all conditions
MOD: IF IA... programming commands now work for all IA-Slots regardless if they are in the active IA-MAP or not.
NOTE (***) : IA RESEND / IA TRIGGER programming commands work utilizing the actual IA-Slot defined as a parameter (1-180). The original commands (1) IA On Trigger / (2) IA Off Trigger / (3) IA Toggle / (4) IA Resend commands work using the IA-Slot defined in the active IA-Map (original behavior of firmware).
4.73
----
MOD: Sending Sysex Messages: Enter "FF" or (&hFF) in editor to create a stop byte. The LF+ will stop sending sysex data as soon as it sees the terminator byte FF. This will allow messages shorted then 16 bytes to be sent without trailing 0's. Example: MIDI SONG message would be 0xF3, 0xYY, 0xFF (YY is song #0-127)
MOD: AXE-FX real-time sync. IA-Slots set to effects not used in the currently loaded preset will now show as "BLOCKED" instead of "OFF". Sync'd IA-Slots not available in the current AXE-FX preset are unusable and will not work in the LF+ either.
MOD: Increased Guitar Tuner timeout period
4.72
----
FIX: KEMPER Profiler would not properly update TUNER display on the LF+ (problem with v4.69-V4.71 firmware)
4.71
----
FIX: Programming Command: Set Step caused various issues on LF+ MINI
FIX: Programming Command: Change Button Start Value, was waiting for button release before continued processing
MOD: Tap-Tempo with auto-button assignment will now reset/re-assign the button used when Buttons change function
MOD: MINI ONLY: Status Light for tap-tempo will blink using the page assigned color if set
MOD: MINI ONLY: if using Page Color's and Tap-Tempo, you may need to adjust the Status Blink time to a longer value for visibility adjustment
4.69
----
NEW: KEMPER KPA effect name database updated to latest. All effect names on buttons change in real-time
NEW: KEMPER KPA DELAY EFFECT NAMES (KPA v4+ firmware) ADDED
NEW: Expression Pedals: HI-RES mode for greater swing accuracy with quality pedals. (re-calibrate after switching to/from this mode)
FIX: AXE-FX effect status not always updated in real-time if a button was being pressed on the LF+
FIX: MIDI THRU parameter was not working properly on certain hardware versions of the LF+ (PCB Ver24)
FIX: EXPANDER NET-END parameteer was not working properly on certain hardware versions of the LF+ (PCB Ver24-2)
MOD: KEMPER KPA EFFECT SYNCING processes in real-time. Changes made to KPA interface update within LF+ immediately
MOD: KEMPER KPA real-time sync now processed as fast as KPA goes.
MOD: (LF+ MINI ONLY) global menu shows only Mini based settings.
MOD: (LF+ MINI ONLY) EXP Pedal system updated
**NOTE 1**: Expander processing changed. PLEASE UPDATE ALL LF+ devices (master/expanders) to same version!
**NOTE 2**: Recommended: Use editor V4.69+ when using this firmware.
**NOTE 3**: Expression Pedal HI-RES mode requires re-calibration when switching to/from this mode. OR USE AUTO-CALIBRATE.
**NOTE 4**: KEMPER USERS: use editor V4.69+, CONNECT to your LF+. From Hardware Menu, Select: "SPECIAL - UPDATE INTERNAL DATA"
**NOTE 5**: as of KEMPER Firmware V5.1.1, Upon initial sync with the LF+, the DELAY effect will report as BYPASSED if its in ON. This is a KEMPER firmware issue and we can not override the wrong status being sent. It reports correctly initially, then sends a bad value afterwards. This only happens upon initial sync with the LF+. Workaround, just press another preset. After initial sync, it works properly. This only effects the DELAY stomp block in the Kemper.
4.67
----
NEW: Expression Pedal: Global settings: Block Toe/Heel sensitivity processing (new feature. allows the pedal to
process all changes made near the toe and heel position. Some pedals as they age have poor POT reliability.
This setting could help the LF+ achieve full 0 (heel) and full 127 (toe) position processing.
NEW: Expression Pedal: Global Settings: Sensitivity Value (some pedals require more sensitivity processing to stop
excessive repeat values from shifting POT values. Poor quality or older POT's within expression pedals could
benefit from lower sensitivity. This can also be turned OFF for high quality expression pedals. Test various settings
to get the best results from your particular pedal. Make sure to fully calibrate, or set to auto-calibrate).
FIX: Expander: MTC trigger event could re-start when pressing exit while connected to an expander
FIX: Expression Pedal: Editor based calibration was not properly updating the LF+ under certain circumstances
FIX: Global Settings: Some settings were not transferred to LF+ under certain circumstances
4.64
----
FIX: Set-List / Song Selection via mode change was not functioning in all cases
4.63
----
MOD: G-Tuner timing extended slight before exit.
MOD: Expander Master Initial Sync Speed enhancement
MOD: EXP Pedal MIN/MAX commands no longer send current values upon change over
MOD: AXE-FX scene Sync'd IA-Slots now allow bypass overrides for custom/forced bypass command switching
4.61
----
MOD: Updated MIDI CLOCK re-sync timing
MOD: Expression Pedal Processing updates
MOD: Act-As-IA Presets display original prompts instead of modified update.
4.58
----
NEW: EXPANDER control Via MIDI: LF+ devices (including LF+ MINI) can now sync with LF+ master/slave units via MIDI (without Expansion Cat-5 cable connected).
NEW: Tap Tempo status blink time now selectable hold time
FIX: System Restore command not always processing properly with global IA-Slots
MOD: MIDI CLOCK IN now maintains perfect timing for tap-tempo blink rates: From midi clock signal in to LF+ device
PLEASE READ RELEASE NOTES BEFORE INSTALLING
V4.55
MAJOR UPDATE
PLEASE READ RELEASE NOTES BEFORE INSTALLING
4.55
----
NEW: Global Setting: Midi Clock IN: Allows LF+ to Blink (Tempo) in time with incoming Midi Clock.
NEW: Global Setting: Midi Clock OUT Enable: Allows LF+ to output Midi Clock when triggered via programming commands, or via tap-tempo if that is turned on.
NEW: MIDI CLOCK: Programming Command: MIDI CLOCK (MS) -> Valid range is 300-779ms (qtr note value). Below 300 will shut off MIDI CLOCK. Use this command to trigger precise timing to the ms.
NEW: MIDI CLOCK: Programming Command: MIDI CLOCK (bpm) -> Valid range is 77-200bpm. Below 77 will shut off MIDI CLOCK. Use this command to trigger precise BPM timing.
NEW: MIDI CLOCK: Provides a master MIDI clock Signal. Source for clock timing: (1) Use your Tap-Tempo button to tap in a timing, (2) programming commands to define precise (ms) or (bpm).
NEW: Global Setting: Tap-tempo sync to Midi clock: Your Tap-Tempo IA-Slot will set the timing for the MIDI Clock. If the MIDI Clock Enable is turned off, then the
status lights will blink in time with tempo, however, clock data will not transmit over MIDI. Use this combination when you aren't using midi clock, but want to see the tapped tempo without having a device sending tap-tempo data to the LF+.
NEW: TAP-TEMPO status light indicator can now be controlled directly from the LF+ without an external device providing tap-tempo data.
NEW: Set-lists allow cycling options: NONE, Top to 1st cycle only, Top and bottom cycling (defines what happens when you reach the end of set-list)
NEW: AXE-FX: Sync: LF+ now auto-detects the model type. (notes below on what was modified for this new feature)
NEW: Expression pedal monitor/troubleshooter system for Editor added.
FIX: Programming Command: SELECT/ENTER didn't always update the Song Name when triggering Songs or Set-lists.
FIX: Global: MIDI MAX Presets settings not properly recognized under certain circumstances when Max Presets set above 384.
FIX: Several Programming Commands were not processing properly during certain conditions.
FIX: MTC (Midi Time Code): If triggered directly (not from expander), the MTC would stop immediately if button 8 (EXIT) was used to trigger activation of the clock.
FIX: Expanders: Armed songs triggered by the expander will not send song programming commands.
MOD: Expanders: Preset names and IA-Slot names may not display correct with real-time sync enabled.
MOD: Several global Menu items were added and/or corrected.
MOD: Global Setting: Auto-Tap-Tempo Trigger Count: Allows 2,3 or 4 QTR note midi triggers. This will apply to the Auto-Tap-Tempo Programming command.
MOD: Tap-Tempo: Tap-Tempo IA-Slots offer better accuracy. Tap-Tempo is designed for 4 quarter note taps, however, it will process on 2 taps.
MOD: Tap-Tempo: usable Qtr Note intervals (60bpm - 200bpm)
MOD: AXE-FX: The LF+ will now automatically detect all AXE-FX models. It is recommended to SET (Send Real-Time SYSEX) to ALL in the AXE-FX (I/O -> MIDI tab)
MOD: AXE-FX: If using Scenes, the LF+ will automatically sync and maintain IA-States. YOU MUST EITHER (1) Global Setting: turn ON "Allow Ext device Force Preset chg", or (2) the IA-Slot for each Scene should have an "External Sync" command added after your CC#34 command (LF+ editor will program this automatically for you- if you select a SCENE to sync, the editor will ask if you want it automatically programmed for you). DO NOT use both the global setting and an EXTERNAL sync. Choose based on your preferences of operation. Either is fine, but try not to do both.
MOD: AXE-FX: The LF+ will only look for "AXE" as the first 3 letters of a MIDI DEVICE name. You can put anything after "AXE". It will auto-detect the model of AXE-FX you have. You no longer have to force a name "AXE-FX" for ultra, "AXE-FX2", and so on. If you switch between different models of AXE-FX, just set the MIDI DEVICE NAME to "AXE-FX" or anything as long as "AXE" begins the name. The LF+ will do the rest in real-time.
MOD: AXE-FX: Updated sync items. Supports expanders.
MOD: KEMPER PROFILER: Updated sync items. Supports expanders.
MISC: Internal updates and compatibility enhancements.
**NOTES**: If you use the Auto-Tap-Tempo Programming command, please be advised that there is a new Global Settings parameter available (# of transmissions). The default is now 2, however, you can change it to 3 or 4 if your devices need more then 2 taps to lock in timing. The new default (2 taps) will double the speed of the Auto-Tap-Tempo message processing from prior firmware. If you require the same behavior as prior firmware, change the global setting to 4 Taps.
4.38
----
FIX: Expanders (master/slaves) not always sync'd when using PRESET-UP, PRESET-DOWN commands
FIX: When "Show 2nd Function Name" parameter is on, NON-STOMP type IA-Slots where showing "
" as name on buttons.
NEW: LF+ will now accept bank changes for controlling SONG selection from external midi device (set bank using CC#0 (0 or 1 data value) followed by PC# for song within bank to select)
NEW: Global Setting: "Reverse Main Display Lines" - The Main LCD will swap the top and bottom lines. Parameter located in the "Hardware" section of Global Features.
MISC: Internal updates and compatibility enhancements.
4.31
----
NEW: Global Settings: New Parameters to force a certain Preset, Song, Set-List or Page at boot-up
FIX: Song mode start-up would sometimes load corrupted song/Preset names until a new preset or song was loaded
FIX: Preset not loaded automatically when switching modes via Page/Button/Function command.
4.29
----
NEW: PC# + command: Will increase the last sent PC# message and then transmits it over midi
NEW: PC# - command: Will decrease the last sent PC# message and then transmits it over midi
NEW: PC# SAVE command: Will take the last transmitted PC# and stores in as the first command in the current preset
FIX: AUTO_TAP_TEMPO: Not processing under all circumstances.
FIX: AUTO_TAP_TEMPO: transmitted a tempo was different from the programmed parameter
FIX: SAVE PRESET: button command will now save/copy with current IA-States (saves live modifications)
FIX: EXPANDER SYNC: Issue with single connected expander syncing properly on first attempt
MOD: Tap Tempo Button Blink: Buttons will now blink White and OFF instead of the color and dimming of that color.
- PC# -,+,save usage: Set an IA-Slot as a Quick-Tap with the PC#- command, another Quick-Tap IA-Slot with the PC#+ command, and one last quick-tap IA-Slot with a PC# Save command. But the buttons on a Page. done. How it works: When a preset is loaded, usually a PC# command is sent. Make sure the device you want to control is the first programming slot. This will only work when sending one PC# message per preset, otherwise it will grab the last preset command sent and allow you to control it live. PC# Save will take the last sent PC# command and store it as the first programming slot in the currently active preset.
- Example: with the 3 IA-Slots added to buttons, and using it with an AXE-FX, we can now press the PC#+ button to increase the Preset in the AXE. Keep going. Find what you like, and then press the button assigned to the IA-Slot with the PC#-SAVE command.
- An alternate approach is to program 2 IA-Slots. One quick-tap with a PC#+ command followed by a PC# SAVE command. and then another IA-Slot with a PC#- and PC# Save. This way the PC# will be saved immediately upon a change...
4.26
----
NEW: Global settings: Block MIDI Transmit on boot-up. By default the LF+ will automatically recall and trigger the last used song/set-list,preset and trigger. Turning Block on will stop the transmission of all MIDI related to this process at boot-up only. Editor 4.26+ required for this feature.
MOD: Expression Pedal: Zipper function automatically supports pedals/effects units that require no interpolation between values
MOD: Auto-GuitarTuner: Extended delay before Tuner exits automatically because of no data from external device
FIX: Expander: Song/Set-List mode would transmit multiple messages under certain circumstances
FIX: SONG MODE: Presets with Steps would not initially trigger the STEP#1 in all cases.
FIX: LF+ MINI: Tap Tempo would not blink in certain circumstances.
4.20
----
FIX: Expression Pedal: Last Page function not working correctly when exp set to Type: (2 Page Button)
FIX: Global Menu: IA-SET-COLOR would not allow selecting color without going to select IA-Slot first
FIX: Programming Command: Change Page will now automatically update the page display immediately
FIX: Certain color based programming commands would not process OFF colors properly under all conditions
MOD: Setting a Button Start Value with invalid (higher then allowed) number will reset to highest allowed number instead of Button #1
MOD: Programming command: Button Start Value - Expanders will now 'shift' their button start value based on this commands value and the global expander button start value setting.
MOD: Programming command: Monentary Preset, Jump - Now supports expander updates and sync (preset mode).
4.19
----
BETA: Functions with AXE-FX XL+
BETA: Utility Menu: Full MIDI DUMP command
FIX: Setlist mode displays an incorrect SONG name at startup, but otherwise functions properly
FIX: IF... SKIP commands would sometimes process follow-on midi commands without processing the condition first
FIX: Guitar Tuner no longer leaves "in tune" markers when tuning
FIX: AXE-FX Sync issue under certain conditions caused wrong Sync State (ON/BYPASS) when using IA-Maps
FIX: Status LED will now show DIM and BRIGHT colors (DIM colors were ignored previously)
FIX: EXPRESSION PEDAL: Certain conditions would make 1 and 2 button processing not work correctly
MOD: AXE-FX related: Added Rotary 1 and Rotary 2 XY effect sync
NEW: EXPRESSION PEDAL: Heel and Toe triggers will now process ALL programming commands in real-time.
NEW: LF+ MINI: Tap Tempo will now "blink" any color assigned to the STATUS LED.
NEW: PROGRAMMING COMMAND: IA-SET STEP NUMBER -- A preset can issue this command with an IA-Slot#, and the Step # to activate. Normally a preset clears all IA-Slots and sets the step to #1. This will override and allow you to select any of the STEPS as the initial value for the preset. RULES: The IA-Slot selected must be a TYPE: STEP, and the IA-Slot must have the Step you selected, otherwise this command will do nothing.
4.17
----
NEW: Expression pedals can now trigger Tuner in HEEL position and then exit tuner by moving expression pedal
FIX: Expression Pedals would process HEEL triggers on TOE-TRIGGER
FIX: Page buttons could "TOGGLE" instead of "TRIGGER ONLY" when changing banks in certain circumstances
FIX: Blocked IA-Slots will no longer process as an IA-POST-GROUP-TRIGGER under all scenarios
MOD: Kemper Initialization changed for faster connection
4.15
----
- FIX: Preset Remember Steps Parameter: Now functions properly in all situations
- FIX: Expander: When saving changes made on the pedal board using "Save/Copy", expanders were not always updating new IA States in real-time with save.
- FIX: Expression Pedal: Setting SLOT2 INVERT caused lock-up of controller under certain circumstances.
- FIX: Global Settings: Tap-Tempo button assignments not properly assigned under certain circumstances.
- FIX: Groups: Double triggering the "ON" grouped IA-Slot under certain circumstances.
- MOD: Expander: Tap Tempo Buttons will blink at full tap-tempo speed instead of 1/2 beat
- MOD: Couple internal bugs that could cause freeze-up under certain programming scenarios
- MOD: Slow response when AXE-FX is has MIDI-THRU turned ON. AXE-FX should not be used with MIDI-THRU when connected direct to LF+. It will now work, but not recommended.
- MOD: Slightly faster processing speeds.
- MOD: AXE-FX Real-Time Sync: LF+ will now allow you to change presets while a real-time sync is still ongoing.
- NEW: AXE-FX: IA-Slots sync'd to a SCENE will no longer go into a Bypass state when pressed
NOTE 1: When using an AXE-FX, MIDI-THRU shound ALWAYS be shut off on both units (LF+ and AXE-FX) when trying to use SYNC. Real-Time Sync will NOT function properly when you are using midi-thru. You are creating loop-back issues between the two units which will cancel the sync function and cause "delays" in responsiveness.
NOTE 2: It has been observed that the AXE-FX can be slow to update sync info when switching to complex presets. This is NOT related to LF+. The AXE-FX has latency and we have replicated this behavior with multiple customer presets. When using real-time sync, the LF+ will wait for the AXE to provide info. the LF+ is sending switching info with NO latency.
4.13
----
- NEW: IA-Slot parameter: Force Step#1 on Preset Change. When turned ON, the IA-Slot will trigger and process STEP #1 as soon as a preset is changed. Default (OFF) will NOT process step #1 and will wait for the user to make a first press of the IA-Slot before triggering STEP #1.
- NEW: Sync of XY states on AXE-FX is now supported in real-time. Prior it was only supported for auto-program loading.
- MOD: Enhanced AXE-FX sync response. Some configurations of Presets in the AXE-FX do not respond quickly. LF+ compensates for slow AXE-FX response times.
- MISC: internal updates/modifications that will not effect programming behavior.
4.10
----
- NEW: TEMPO: LF+ MINI now supports Status Light blinking for KEMPER and AXE-FX Tap Tempo
- NEW: GLOBAL: Button LCD row #1 can now have status identified by UPPER/lower case letters or "
" for inactive/blocked.
- FIX: Programming Commands: IF IA... commands will trigger properly under all conditions now
- FIX: Kemper Effect Names will show properly in all situations when properly connected and in sync.
- FIX: EXPANDER: Song/Set-List programming changes did not automatically sync under certain circumstances.
- MOD: LF+ will force editor to update effects entries when a CLEAR MEMORY is executed on the LF+ setting unit to default values. Will fix Kemper effects names showing blank when in sync.
- MOD: Expression Pedal: 2 Page button Type: now works with all button types programmable (including page change)
- MOD: IA Exclusive Post trigger Group: If a trigger is set to an IA-Slot in the Current Map (and set to Blocked Initial State in Preset)- the trigger will not process
- MISC: Various internal modifications
4.08
----
- FIX: Expression Pedal set as 2 page button: corrected issue under certain circumstances whereby the button requires a double-press to activate.
- MOD: IA-Trigger (ON/OFF/TOGGLE) special commands are now blocked from updating IA-Slots currently set as "BLOCKED" for the active preset
4.07
----
- FIX: Blocked IA-Slots would not change state in certain cases when a new preset was processed
- NEW: Preset Parameter: Send Blocked Initial IA as Bypass: When preset is loaded/re-pressed, Blocked IA's will initially send the BYPASS commands and then remain blocked from user/system processing. By default, Blocked IA's will not send any commands and will not allow a user to trigger.
- NEW: Expression Pedal: Zipper Parameter. When turned ON, a CC type expression pedal will automatically send all sequential values from the last position to the current position instead of jumping. If the previous position was value 2 and a very quick change brings the value to 127, the zipper parameter will transmit every CC# between 2 and 127 automatically. Normally this would be turned OFF.
- NEW: AXE-FX Looper Mode: the LF+ will automatically detect / set looper functions to OFF if a looper is not used in the current preset, otherwise real-time status of all looper functions will be displayed.
4.05 -- PRODUCTION v4 release
- NEW: PRESET: special programming command: "Preset Momentary Jump"- the parameter tells the command which preset to jump to after the momentary hold of the preset. This command should only be used within a preset. When you trigger the preset, hold the switch down; upon release, the LF+ will jump to the programmed preset #.
- NEW: Set-List now has a Cycle Type. It can Stop at last Song, or Cycle back to the 1st song.
- NEW: Device Personality integration System. This will allow LF+ to add new effects unit vendors and Sync capabilities. New devices coming soon.
- FIX: G-Tuner exiting Tuner mode on its own
- FIX: Triggering Preset from a bank selection will now process correctly on first press
- FIX: misc internal items, additional internal processing modifications, modified various modules for stability, enhanced features, and future add-on integration.
- FIX: Expression Pedals: Preset Resend will process correctly for CC type only
- FIX: Expression Pedals: When using external switches as buttons which are electrically 'noisy', the LF+ could appear to toggle switch buttons ON/OFF during a single press.
- FIX: PRESET: MOMENTARY/JUMP COMMAND: Was not triggering the proper preset under all circumstances
- FIX: PRESET: PRESET TRIGGER COMMAND: Was not triggering the proper preset under all circumstances
- FIX: PRESET: IA-Slots set to BLOCKED would initially trigger commands, but block Button Presses. Now they block both sending commands and user Button Presses
- FIX: IA-SLOTS: Processed Blocked commands under certain circumstances. No longer will Blocked Presets process or trigger.
- MOD: PRESET: IA-Slot color overrides are reset when changing Presets. Treated as Global changes prior
- MOD: PRESET CHANGE WITH KEMPER TUNER: Modified so that preset changes are not slowed down when Tuner data is present
- MOD: Kemper KPA Real-Time Sync: now will sync from startup automatically. Many other Kemper Sync enhancements included.
- MOD: Expander connection processing modified to correct for certain issues.
- MOD: Expander connection updated to handle real-time Sync
- NOTE: V4 platform now in production.
3.39
- new: Preset: Parameter: MOMENTARY. when set, the preset will load and process as normal. It will remain active as long as the button is held down. When released, the LF+ will go back to the previous preset. This command REQUIRES: (1) Block Preset SAVE turned ON in global section, (2) only one function on the button the preset is assigned too. These parameter selections are required given the preset must take control immediately (1 function), and the system should NOT wait to trigger (block preset save)
- Fix: Momentary IA-Slots were processing ON commands instead of BYPASS commands upon button release (V3.38 only)
- Fix: External Device Sync not always handled properly on Presets using IA-Maps other then Default.
3.38
----
NOTES: AXE-FX and KEMPER will now automatically adjust in real-time to changes made on the unit(s) themselves
- NEW: Programming Command: Page Change / Preset default : This command will change the page to whatever default page is set for the current preset
- NEW: IA-Slot: When an IA-Slot is set to sync with an AXE-FX (new effect type SCENE1-8, automatically sync SCENE states. New options on bottom of Effect DropDown.
- NEW: When AXE-FX (V11+) or KEMPER (v2.4.3.9920+) is selected as Guitar Tuner SOURCE, Either device will automatically start tuner when engaged by the device itself. Kemper when set to show tuned on expression pedal at heel will also trigger tuner
- NEW: Guitar Tuner: Expression pedals can now be used while Tuner is active to control CC#'s, or to exit G-Tuner
- NEW: LF+ will auto-sync and update if an AXE-FX is controlled from USB or other MIDI device other then LF+
- NEW: Global Setting: Auto-Engage Tuner- when set, LF+ will jump to tuner when external device is triggered (Kemper in mute position as example)
- Mod: Global Setting: Tap Tempo Button- new Setting: Auto-Detect. When set, it will use whatever button on a page has a Tap-Tempo type IA-Slot assigned to it as the blinking button.
- mod: Sync with Kemper: If sync data is missing, the sync name parameter will be ignored to allow display of programmed preset name
- mod: Updated IA-Slot Command Processing Algorithms
- fix: When selecting a page manually, in certain cases a different preset would love at the same time the new page is triggered
- fix: Auto-tap-tempo programming command: not executed under certain circumstances
- fix: EXPANDER: AXE-FX sync functions in real-time sync for effects and preset name
- fix: EXPANDER: KEMPER sync functions in real-time sync for effects and preset name
- fix: Tap-Tempo Display was not properly blinking according to global setting in certain cirmcumstances
- fix: Tap-Tempo display on status LED of LF+ Mini not operating in all cases properly
- fix: LF+ not updated properly in some cases when global ext Force Sync parameter is set.
3.34
----
- NEW: KEMPER SYNC Engine: Out of beta. All functions work. Now processes in real-time. Changes made to KPA are reflected immediately in properly configured LF+ for Kemper.
- NEW: KEMPER editor sync: Allows editor to process correctly in Browser/Performance mode
- MOD: IA-LABELS: If the first letter is a space " ", then the label is considered empty and the IA-Slots nickname will show instead of the presets Label definition.
- FIX: AXE-FX LOOPER sync [out of beta]-- all functions work and several bugs corrected
- FIX: LOOPER mode sync was interferring with non-looper IA-Slots reported states
- FIX: EXPANDERS: Now sync's properly with Labels.
- FIX: Presets: (with STEP commands) not triggered properly in Song/Set-List mode.
- FIX: Presets: Allow Multi-Press parameter now functions properly in all operating modes
- MOD: Set-List Last Slot Parameter now implimented
- MISC: internal modifications for increased performance
3.31
----
- NEW: AXE-FX LOOPER SYNC. Set an IA-Slot to Sync with AXE-FX. Select the Looper function (end of the effects list). The states/buttons will automatically update with AXE-FX in realtime as long as you turn on the Looper function. How to use: For each looper related IA-Slot, set the Device Sync to "AXE-FX", and set the effect to the associated looper function. When looper command is turned ON, these IA-Slots will automatically sync with the current state of the looper in the AXE-FX.
- NEW: Programming command: LOOPER_ON, LOOPER_OFF. Use to turn AXE-FX Looper ON/OFF. Suggested to put a Looper ON command in your record IA-Slot ON programming message. This will allow you trigger it ON when first recording. You can put this command in all LOOPER buttons of course.
- EG: Set the 'Record' IA-Slot ON command Programming as:
#1: MIDI, CC#, [LOOPER RECORD] CC#, 127
#2: LOOPER_ON
- NEW: LF+ will automatically update IA-Slot states for sync'd effects when AXE-FX changes presets from external source (Global parameter "Allow External Device Force Preset Change" must be ON)
- NEW: IA-Slots can define a Preset Label from 1-10, Each Preset can assign up to 10 labels which will be used for Nick-Names of an IA-Slot to be displayed on the buttons. One example use is to assign a SCENE IA-Slot of an AXE-FX, and set the Label (SCENE 1 = Label 1, etc...) At the Preset Level, you can defined the SCENE name (Label 1 = "SOLO" for Preset 1, Label 1 = "INTRO" for Preset 2, etc...)
- NEW: Programming Command: EXP_SLOT2_RESET - This will allow a preset, IA-Slot or Song to reset the current Slot2 Expression Pedal Programming commands. The expression pedal will only process the global settings, and Slot2 will be cleared and transmit nothing.
- NEW: Preset Parameter: Page Button Start Value: You can force a preset to reset the page button to the default global setting, use the current page button setting, or set a specific value. Please note this WILL effect units connected as expanders- it is recommended that you leave these settings to default at all times when using expanders.
- NEW: SET-LIST: New Parameter defines LAST SLOT used. System won't scroll above this slot using SONG UP. Default is "ALL" and will scroll through all song slots.
- MOD: External Sync Command- will now process after [all] midi commands and triggers are sent
- MOD: Song/Set-List mode: No longer forces first preset upon trigger. Any preset can Trigger in an 'Armed' song.
- MOD: Page Functions will now work with 2nd Function ASAP processing Parameter. as soon as the hold time is up, page functions will trigger on a button without waiting for a release of the button
- MOD: Speed enhancements: LF+ responsiveness enhanced
- MOD: REMOVED A/B SWAP MEMORY FUNCTIONS
- MOD: REMOVED MEMORY SNAPSHOT/RESTORE FUNCTIONS
- FIX: "IF.IA..." programming command(s) would incorrectly trigger in certain cases.
- FIX: 2nd Functions using Global Setting:2nd ASAP parameter turned ON, could cause erroneous 1st Function trigger
3.30
----
- fix: Expression pedal using IA-Triggers, Latch triggers did not trigger properly in v3.29
- fix: Tap Tempo on a button not properly updated when expression pedals had button triggers
- fix: Guitar Tuner activated by expression pedal button now properly works
- fix: Tap Tempo not resetting to global defaults on page change
- fix: Presets would not process proper IA-Map when switching Pages at the same time pages were changed
- new: Reserved MIDI DEVICE NAME: "AXE-FXXL" - will now process sync/etc with AXE-FX II XL
- new: PROGRAMMING COMMAND: "PAGE LOCK", "PAGE UNLOCK". When Page Lock command is processed, NO page change commands (preset, IA-Slot or Song) programming commands will active a page change. It will ignore the page change request. The LF+ will not process these commands until either system reset, exit from menu system, or a PAGE UNLOCK command is triggered. This will allow you to select a page- and then force the system to "lock" into that page and not change based on programming commands. Page buttons set to change pages WILL process a page change.
- mod: If.Trigger.Skip command: If processing groups, the triggered IA's with the skip trigger programming command will now skip the commands below it and will look for next if... programming command or do nothing if it hits the end of the programming commands.
- mod: When presets are triggered, Groups will process make/break connections if IA-Resend is turned ON. before only a IA-Slot trigger would process group make/break connections. Please check your programming for potential issues. Recommended usage: Set the IA-Slot that should be ON as an initial state of "ON" and set the others in the group as "BYPASS".
- NEW (BETA): AXE-FX Looper mode. Works with Ultra,AXE-2, AXE-2 XL. To activate looper mode- make sure at least one IA-Slot in currently active IA-Map has sync with AXE-FX, and EFFECT "Looper". Only one- usually the record IA-Slot. Make sure a Midi Chan is properly set with the proper reserved AXE name (AXE-FX, AXE-FX2, AXE-FXXL). when a preset is loaded, it will activate looper mode if a Loop IA-Slot is present. Looper mode will automatically stop when changing presets. Although, if the preset switched too also has a looper, then it will activate again. No loop messages will appear on the Main LCD until the Looper begins for the first time during the current preset. The 2nd row of the main LCD will show the state (STOP, REC, PLAY, DUB, etc...) and will also show the direction and position within the current loop using a moving bar display.
3.29
----
- new: Tap Tempo Button will blink in time with Tap Tempo Messages as long as an OFF color is set for the TAP-TEMPO button. Global setting allows you to select a default physical button to blink. If a TAP-TEMPO type IA-Slot is created and used on the current page- that button will automatically become the tap tempo button to blink.
- new: Global setting: Tap Tempo Button: A global setting to tell LF+ which button to blink when Tap Tempo message comes in. This global setting will automatically be overwritten if an IA-Slot is on a button of the active Page and its type is set to TAP-TEMPO.
- new: Special Function: Page Button Start Value. Setting this command will switch the button on a page that displays as the first button on the physical device. For instance, setting the value to 13 will allow a LF+ 12+ to show page buttons 13-24 as programmed on physical buttons 1-12. You can switch which starting button on a page begins with button #1 on the physical device. This allows you to move around a programmed page without actually changing a page. Using an IA-Slot as a STEP command, you could step through 4 "pages" of 12 button layouts using a single page in the LF+! This will preserve 2nd function states, current banking, etc...
- new: Global setting: Expedite 2nd Function Trigger. When this parameter is turned on (which will turn off Preset/Save blocking), then the LF+ will automatically trigger the 2nd function as soon as the minimum wait time programmed in global settings is reached. This will force the LF+ to trigger the 2nd function without waiting for the user to release the button.
- FIX: KEMPER sync related issues with external sync activated and sync names or states not properly updated.
- FIX: Expression Pedals used as buttons would freeze unit if special menu commands were enabled on button being pressed (MENU, etc...) RECOMMENDATION: DO NOT use auto-calibrate with buttons on expression pedal ports. Go to the Global menu on the LF+ itself and calibrate the buttons and save that calibration.
- FIX: Expression Pedals used as trigger for Page buttons could require multi-press under certain programming conditions.
- MOD: faster expression pedal button processing
- MOD: Switching from a Page with IA-Slot Maps to a Page without IA-Slot maps will reset the IA-Map to the currently active Preset's IA-MAP.
v3.28
- NOTE: Please reprogram your Expression pedals after this update is installed. Parameters will be reset upon loading this firmware for the first time.
- new: Global Setting: Expression Pedals (Continuous Controller Type) can trigger any one of the 180 IA-Slots when Full Toe and/or Full Heel Position is reached
- new: Global Setting: to allow Button LCD's that show 2nd function IA-Slots to go all UPPER case for status ON, and LOWERCASE for status BYPASS or OFF.
- new: Global Setting: Each MIDI channel now allows you to define the Maximum Preset # programmable
- new: Global Setting: Each MIDI channel will now allow you to force an automatic BANK change command. Before only supported devices would do it (Liquid Router, AXE-FX, KEMPER, ECLIPSE)
- new: Pages: New Parameter (IA-Trigger) allows you to trigger any of the 180 IA-Slots upon loading of the Page. ON messages of the IA-Slot selected will be processed
- new: Expanders: can now send SLOT2 expression pedal data to master. Prior firmware only allowed Masters to process Slot2 Data
- mod: LF+ Direct Auto-Program of AXE-FX removed. All Auto-Programming is supported in the Editor (AXE-FX, Kemper Browse Mode, Kemper Performance Mode)
- mod: Liquid-Wireless pack v1.12: LW protocol modification. New protocol update allows 300 Feet w/ no failures.
- mod: BlueTooth wireless pack v1.13: pairing for PC/Editor modified to support normal auto-pairing.
- fix: Processing of IA-Slots with external sync commands could process phantom commands after the external sync completed
- fix: removed battery fail over restart issue when using Liquid-Power packs running past 10 hours.
- fix: Several Internal processing items, increased processing speed of certain features
v3.25
- new: Page: New Parameter: Force IA-Map: Allows you to override the used IA-MAP at a page level. ALL PRESET level IA-MAPS will be ignored if a page level IA-MAP is selected. Pages without this parameter set, will allow preset level IA-Maps to take over and change the system in real-time.
- new: Page: New Parameter: Forced Mode: options: NO CHANGE, Force Preset Mode, Force Song Mode, Force Set-List Mode
- new: Page: New Parameter: Preset colors: Pages can now select a Preset Selected and Preset not selected color. This will override the global settings when set. A single selected and a single not-selected color for each each page is allowed. Different 2nd function colors are not supported at Page level at this time.
- new: Module compatibility: Module Sub-system (v1.1) added to handle new "attachments" and product add-on modules.
- new: Multi-Protocol (proprietary Liquid-Link) and other compatibility: Module Sub-system (v1.3) added to handle functionality modules and newer feature-sets being released
- mod: Button function: Preset-UP in Song/Set-List mode will stop once an empty song position is found. only songs from the first position until the first EMPTY slot are available for Preset UP/DOWN scrolling.
- mod: Updated Auto-Sync Engine and compatibility with new Editor Auto-Sync. NOTE: Auto-Load within the LF+ itself will be removed in a later firmware.. You will have full auto-load, auto-load wizard and auto-sync capabilities via the editor at all times though, and it will work with all future firmware via the editor. New compatibility for KEMPER Performance Mode.
- fix: IA-Slot: Issue with execution of certain commands (such as external sync) which would stop remaining commands from executing properly.
v3.20
- new: Global Setting: Save External Sync'd Preset Name into current Preset automatically option. Global2 settings screen on editor. When turned on, if the LF+ successfully sync's with an external device and receives a preset name, it will save that name and nickname into the currently active preset. Expanders main display will be correct, however, expander presets won't store changes until Master Sync.
- new: Global Setting: Save External Sync'd Initial IA-States into current Preset automatically option. Global2 settings screen on editor. When turned on, if the LF+ successfully sync's with an external device and receives IA-State updates, it will save those into the currently active preset. Expanders main display and buttons will be correct, however, expander presets won't store changes until Master Sync.
- new: Global Setting: Expression Pedals can now have Min/Max Midi value sweep ranges assigned.
- new: Programming Commands: EXP MIN VALUE - Temporary minimum midi value for an expression pedal
- new: Programming Commands: EXP MAX VALUE - Temporary maximum midi value for an expression pedal
- new: Presets: New Parameter: "Reset Page "Preset" Button Functions. When turned ON, the preset will reset all buttons to Function #1 if they are currently active on Function #2 if a Button has a Preset Holder in function #1.
- mod: Presets: Parameter Change: "Reset "NON-Preset" button Functions. When Turned ON, any button that is active with Function #2 and does NOT have a preset holder in Function #1, will reset. You can turn this parameter On, along with the new "Preset" reset parameter and ALL buttons will be reset. But now you have the ability to reset all buttons except presets, or vice versa.
- fix: Global Setting ResetOnPage not always saving correctly
- fix: Global Setting Force External Preset Changes on update: not saving to editor properly in certain situations
- mod: Global Menu: Settings order has changed to group similar settings together
- mod: LF+ Mini will now import and maintain model JR+, Pro+, 12+ and 12 global setting parameters without erasing, now 100% compatible backups
BUY REGISTERED PASSPORTS,DRIVERS LICENSE ONLINE(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Legit Passports, Id Cards, Drivers License And Much More (obtain Full Nationality For Any Country), Passports, ID cards, Drivers license, Working permits, Birth/Marriage certificates(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Get A second Chance In Life with New Identity; protect your privacy, build new credit history, bypass criminal background checks, take back your freedom . We are unique producers of Authentic High Quality Real Genuine Data Base Registered Citizenship documents.(puredocuments21@gmail.com)(WhatsApp:+19254121971)
We offer only Original high-quality data base registered passports, Drivers Licenses, ID cards, Stamps, Visas, School Diploma, working permits, birth certificates, marriage certificates, death certificates, green cards, credit cards, bank receipts and other documents for a number of countries like: USA, Australia, Belgium, Brazil, Canada, Italia, Finland, France, Germany, Israel, Mexico, Netherlands, South Africa, Spain, United Kingdom, Japan, China and This list is not full!
Our Team has years of experience producing high quality Real genuine data base registered passports, data base Citizenship Documents, Other Identity documents. We use high quality equipment and materials to produce documents being registered by our insiders working in the various passport agencies. All secret features of real passports are carefully duplicated for our falsified documents. Over 17 million of our documents are circulating around the world.
We assist our clients get passports, id cards, resident permits, driving license, ssn, birth certificates and much more for any country.
We are Registered immigration lawyers consultants to provide you and your family with professional consultations and registered citizenship and immigration documents worldwide.
If any of these documents interest you, please feel free to contact us. We will give you our best price upon receive of your detailed inquiry.
Get your new identity to work or travel in any country of your choice.
Send private messages to either contacts;
Email:======================= puredocuments21@gmail.com
WhatsApp:============== +1 (925) 412-1971
https://puredocumentsonline.blogspot.com
Real And Fake Documents Online
About Registered Document
1)Registered documents are registered in the national database and contain all the applicant’s vital information.
2)With the registered documents , you can apply for renewal when needed.
3)Our registered documents comply with all the legal requirements imposed by authorities. They can be used for border crossings and other cases involving scanning procedures.
4)With all registration issues in mind, production of registered documents takes 3 to 4 working days.
About Fake Documents
1)Fake documents are not registered in any system. They are issued to a person for camouflage purposes only.
2)Although they do look like government-issued ones, false documents shall not be scanned by data-reading machines as your personal information is not going to show up.
3)You cannot apply for renewal if your ID card or driver’s license hasn’t been registered previously.
In most cases, your false document will be ready in a matter of hours or within a day or two.
Our Top Fields of Expertise: Buy Fake or Registered Documents Online
Buy Fake/Registered Passports,Drivers License, Id Card, Citizenship And Much More For Canada, USA, France, UK, Spain, Italy,Portugal(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR CANADIAN VISA, CITIZENSHIP ONLINE(PASSPORT,DRIVERS LICENSE, ID CARD, SIN)(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR AMERICAN VISA,CITIZENSHIP ONLINE(PASSPORT,DRIVERS LICENSE, ID CARD, SSN)(Whatsapp:+19254121971)(puredocuments21@gmail.com)
HOW TO APPLY FOR CANADIAN VISA AND CITIZENSHIP ONLINE(PASSPORT,DRIVERS LICENSE, ID CARD, SIN)(Whatsapp:+19254121971)(puredocuments21@gmail.com)
HOW TO APPLY FOR AMERICAN VISA AND CITIZENSHIP ONLINE(PASSPORT,DRIVERS LICENSE, ID CARD, SSN)(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR SPANISH VISA AND CITIZENSHIP ONLINE(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR ITALIAN VISA AND CITIZENSHIP ONLINE(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR GERMAN VISA AND CITIZENSHIP ONLINE(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR UK VISA AND CITIZENSHIP ONLINE(Whatsapp:+19254121971)(puredocuments21@gmail.com)
APPLY FOR PORTUGUESE CITIZENSHIP ONLINE(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered UK Driving License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Canadian Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Denmark Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered USA Driver’s License https(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Japanese Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Chinese Driver’s License (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Italian Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Greece Driver’s License (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Austria Driver’s License (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Spanish Driver’s License (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Singapore Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered German Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered S Korea Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Portuguese Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Finland Driver’s License. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Luxembourg Driver’s License (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Australian Driver’s License, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Austria Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Spanish Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Singapore Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered German Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered S Korea Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Japanese Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Finland Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Luxembourg Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Greece Passports, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Portuguese Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered UK Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Canadian Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered French Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Denmark Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Bahamas Passport Online(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Mexico Passport Online(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Brazil Passport Online(Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered USA Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Japanese Passport. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Chinese Passport. (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Italian Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
Buy Fake/Registered Australian Passport, (Whatsapp:+19254121971)(puredocuments21@gmail.com)
“Buy Real And Fake Immigration Documents Online” (Whatsapp:+19254121971)(puredocuments21@gmail.com)
“Buy Real And Fake Travel Documents Online” (Whatsapp:+19254121971)(puredocuments21@gmail.com)
• ONLINE CREDITCARD DUMPS SHOP » Sell CreditCards CVV/CVV2 Fullz info, Dumps Track With Pin High Balance
• ONLINE CREDITCARD DUMPS SHOP » Sell Fresh CreditCard CVV, US, UK, EU, AU, CA and many countries..
• FRESH CC/CVV SHOP » Sell CreditCards Fullz BIN SSN DOB MMN DL 2023
• CREDITCARD CVV Shop Since 2014 » Sell CVV, CVV2, Fullz info High Validity - Good Balance
• CREDITCARD CVV Dumps Track 1 & 2 With Pin Shop New Updates Fresh Stuff Every Week
VISIT SHOP
https://dumps-cc.com/
https://dumps-cc.com/
OUR SHOP & STUFF
High validity ~90%
Very fresh stuff, updates EVERY WEEK. Stuff checked 500$ ~ 3000$ before add to shop.
Easy interface
Fast & fully automated balance topup with Bitcoin
Refund system
Technical Support
Total secure
Guarantee for CC/CVV, Dumps not good.
Our shop with stuff Verifed & Trusted on 4 most popular Cardingsite
DUMPS TRACK 1 / 2 WITH & WITHOUT PIN
CLASSIC
STANDARD
PLATINUM
BUSINESS
GOLD PREMIUM
CORPORATE T&E
PURCHASING
WORLD CARD
SIGNATURE
DISCOVER
Guarantee 100% First Hand Dumps
We replace and refund with Dumps: 04/Hold-call, 41/Lost Card, 43/Stolen card, 05/Do not honor, 62/Regional Restriction
VISIT SHOP
https://dumps-cc.com/
https://dumps-cc.com/
Dumps Demo: Track2: 5391860111313857=23081010000020200000
Country Code: US
DUMPS + PIN DEMO:
*Dumps with Pin (CANADA)
Track1: B4530920124710013^Bibliotheque^17032206128000000547000000
Track2: 4530920124710013=17032206128000547000
ATM Pin: 3377
*Dumps with Pin (AUSTRALIA)
Track1: B4072209014479002^Priya/Selva-Nayagam^18082010000000000112000000
Track2: 4072209014479002=18082010000000112000
ATM Pin: 5081
*Dumps with Pin (CHINA)
Track1: B4067701731557109^Wei-Chun/Chang^19011014045400000988000000
Track2: 4067701731557109=19011014045400988000
ATM Pin: 2405
*Dumps with Pin (FRANCE)
Track1 : B4974903419054100^guihard/pascal^18021104400000000091000000
Track2 : 4974903419054100=18021104400000091000
ATM Pin: 0004
Track1: 4207670194839117^CRUZ/NELLY R^25062010000000754000000
Track2: 4207670194839117=25062010000075400000
Country Code: US
Pin 5335
State: NY
City: N/A
ZIP: N/A
Type: VISA
Debit/Credit: DEBIT
Subtype: CLASSIC
Dumps without Pin Demo:
Track1: 4207670197255485^JEAN/DARREN^24082010000000836000000
Track2: 4207670197255485=24082010000083600000
Country Code: US
State: NY
City: Monticello
ZIP: N/A
Type: VISA
Debit/Credit: DEBIT
Subtype: CLASSIC
DEMO CVV
23410695|4170080122002312|04|2027|023|Chris Carmody|21 Peter Tufts Rd| ARLINGTON| MA|02474|U.S.A.|7816463282|
23410696|4486660000043287|08|2024|476|RAYMOND L FIELDS|36 CONVENT DR, BUILDING:49 ROOM NBR: 5C76|BETHESDA|MD|20892|U.S.A.|13014969917|
23410697|4246311340176426|04|2024|918|Steven Young|2797 Belgrave Rd| CLEVELAND|OH| 44124|U.S.A.|2167657412|
23410698|4828802940418016|05|2024|509|LEANDRO DIVERA|411 WALNUT STREET, #8138|GREEN COVE SPRINGS|FL| 32043|U.S.A.|9046382110|
23410702|5405015421294891|02|2024|197|Jhin Choh|1007 W Harrison St Room1009|CHICAGO|IL|60607|U.S.A.|3129968688|
23410703|374593271943005|06|2027|7150|MATHEW JORDAN|UNIT P, BANKSIDE TRADE PARK, LOVE LANE, CIRENCESTER|GLOUCESTERSHIRE|XX|GL7 1YG|UNITED KINGDOM|011441285642222|
UK|04|2025|060|Ian|Harris|7 Westering parkway|Wolverhampton|West Midlands|WV108TS|01902 680786|4751290326393816|
UK|08|2024|471|John|Esslemont|Radlap,dounby|Kirkwall|Orkney Islands|Kw17 2jb|07885670449|4762248281377767|
UK|09|2023|002|Andy|Smart|Tudor Hall Main Street Wick|Pershore|Worcestershire|WR10 3NU|07770824461|4751410420938502|
DEMO USA FULLZ WITH DOB SSN MMN
5514865397061999|11|22|269|Waneta Truckey|17661Heimbach Td|Three Rivers|MI|49093|United States|2695986924|07/28/1942|376-42-3256|Wstruckey@yahoo.com|Joseph1932@|MMN = Reinoehl|172.72.156.80
4147400267894135|06|24|265|Raymond Hosch|4054 N Kedzie avenue apt300|Chicago|IL|60618|United States|17733707757|11/17/1960|361-56-4518|rayhosch@yahoo.com|MYfather+71|MMN = Connelly|99.114.194.171
4039954115244415|12|24|138|Terry Hudson|9609 Arthur Ct. APT 3|Crown Point|Indiana|46307|United States|2196715378|02/04/1958|310-68-4118|mcbleed2004@yahoo.com|Prettyboy60@9609|MMN = Stokes|174.221.10.132
• WHERE TO BUY CC AND DUMPS 101 201
• HOW TO BUY CC AND DUMPS 101 201
• 2023 VENDOR CREDITCARD DUMPS TRACK WITH PIN
• 2023 DUMPS SKIMMER AND CVV SHOP FREE BIN CHECKER
• GOOD CC DUMPS SHOP CVV DUMPS STORE 2022
• BUY FRESH CREDITCARD CVV FULL INFO US UK EU AU CA
• BUY FRESH CREDITCARD CVV FULL INFO CHINA JAPAN KOREA
• BUY FRESH CREDITCARD CVV FULL INFO INDIA RUSSIA UAE
• BUY FRESH CREDITCARD CVV FULL INFO ASIAN AND MANY COUNTRIES
• BUY DUMPS TRACK WITH PIN FRESH HIGH QUALITY
• BUY DUMPS TRACK WITH PIN HIGH BALANCE
• BUY DUMPS WITH PIN ONLINE BEST CC DUMPS SHOP
• BUY VALID CVV DUMPS FRESH CC DUMPS STORE 2023
VISIT SHOP
https://dumps-cc.com/
https://dumps-cc.com/
WE ALSO OFFER
EGiftcards Walmart, Amazon, Ebay..
Software
Bank Login
PayPal account
creditcard dumps shop, buy dumps online, vendor ccv, buy cvv, buy cc dumps, dumps shop, vendor dumps track 1 2 with pin, buy cvv online, dumps cc, cc for sale dumps, buy dumps cvv, cc dumps for sale, creditcard dumps shop buying cc, dumps credit card, cvv dumps with pin, cvv for sale, cc buy, dumps pin, cvv sites, cc shop cvv, buy creditcard dumps, dumps cc, dumps shop cc, cvv site, buy dumps credit card, dumps pin shop, best cvv shop online, buy ccv, buy dumps creditcard with cvv2, dumps cc shop, creditcard dumps with pin, cc dumps with pin, dumps cc website, cc and dumps track 1 2, online dumps shop, cc cvv dumps, buy cvv dumps, dumps cvv shop, cvv dumps for sale, cc bins, dumps and cc,dumps pin shop, cc shop, cc dumps with pin, dumps cc sites, cc and dumps, online dumps shop, cc cvv dumps, dumps shop, dumps with pin, buy dumps, cvv dumps, cc dumps, dumps cvv, dumps with pin, buy dumps with pin, best cvv shop online, dumps store, dumps with pin shop, buy dumps online, buy creditcard dumps online, dumps atm, dumps high valid, good shop cc dumps, cc dumps with pin, buy cvv fullz online, good dumps shop
Hi all !
I have UK fullz dead , if u want to buy i have:
UK FULLZ RANDOM ---->>>>
4658652008699022|12/25|545|Name on Card : Mr. Lewis Crabtree |1 pengover close liskeard |Liskeard |Pl14 3nz|UK|phone number : 07463983223|date of birth : 01/04/1994|Mother's maiden name: Crabtree |account number : 33785939|sort code : 20-50-40|Full Name : L m crabtree
Uk Fullz with BANK i have ( Halifax, RBS, Santander, Natwest, HSBC, Bank of scotland, Barclays , Lloyds, First Direct, TSB, COOP, Metro, Nationwide, Yorkshire, UlsterBank, Clydesdale, Tesco, Monzo, Ireland, Issuing Bank, Revolut, Starling ) ----->>>>>
4751 2902 3460 8842|01|24|148|A a narma|33, 33 Beaumont Road||LE5 3HB|UK\phone number : 07413325093|date of birth : 07/05/1993|account number : 71240578|sort code: 60-15-48|mother maiden name : Khalifa |Full name: Asjad NARMA
Uk Fullz with mobile network providers ( VODAFONE , O2 , EE...) ----->>>>>
Username : dwf3658@me.com
Password : Enigmatic1958
--------------EE Billing-----------------------
Full Name : David Foster
Address 1 : 34 Adelaide Road
Address 2 : West Ealing
City : London
County : Select County
Post Code : W13 9EB
Phone Number : 07931712570
--------------EE Fullz-----------------------
Card Holder Name : D W FOSTER
Card Number : 4659 2300 7263 0170
Expiry Date : 08/23
CVV : 707
DOB(DD/MM/YYYY) : 03/06/1958
Account Number : 20371858
Sort Code : 20-17-18
MMN : McLennan
|--------------- I N F O | I P -------------------|
|Client IP : 86.250.26.253
|--- http://www.geoiptool.com/?IP=86.250.26.253 ----
User Agent : Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_6) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/14.0 Safari/605.1.15
|----------------
Uk Fullz with PHONE PROVIDER ----->>>>>
Username : ruthieokane@googlemail.com
Password : Hockey50
--------------O2 Billing-----------------------
Full Name : Ruth O'Kane
Address 1 : 30 Ballymacashen Road
Address 2 : Killinchy
City : Newtownards
County : Down
Post Code : BT24 6SH
Phone Number : 07821923157
--------------O2 Fullz-----------------------
Card Holder Name : MRS R O'KANE
Card Number : 4751 1100 1381 5188
Expiry Date : 06 / 24
CVV : 134
DOB(DD/MM/YYYY) : 21/08/1961
Account Number : 56523084
Sort Code : 98-00-30
MMN : McCully
|--------------- I N F O | I P -------------------|
|Client IP : 92.41.138.95
|--- http://www.geoiptool.com/?IP=92.41.138.95 ----
User Agent : Mozilla/5.0 (Linux; Android 10; SAMSUNG SM-A920F) AppleWebKit/537.36 (KHTML, like Gecko) SamsungBrowser/12.0 Chrome/79.0.3945.136 Mobile Safari/537.36
|----------- ((())) --------------|
Uk Fullz with AGE RANGE ----->>>>>
I have all DOB from 1930s-2000s
Uk Fullz with SORTCODE ----->>>>>
I have over 100k fullz so u can send any sortcode i will check for u
Uk Fullz with NIN ----->>>>>
Full name: Michael Enomah
Telephone: 07459192535
Date of birth: 14/03/1963
Email: mikeenomah@gmail.com
Address: 66 peninsula house o'Leary street , Warrington, Wa27sa
MMN: Agnes Ikhelua
Card BIN: 465902
Cardholder name: M.Enomah
Card number: 4659024519856021
Card exp: 02/23
Security code: 059
Account: 43479765
Sort Code: 20-91-48
NIN: Sy 48 86 55 d
DL: ENOMA603143M99MM
Submitted by: 83.137.6.226
Location: 83.137.6.226
UserAgent: Mozilla/5.0 (Linux; Android 10; SAMSUNG SM-A505FN) AppleWebKit/537.36 (KHTML, like Gecko) SamsungBrowser/12.1 Chrome/79.0.3945.136 Mobile Safari/537.36
Browser:
Uk Fullz with SPECIFIC DOOR ----->>>>>
Almost all have house numbers including floors and apartments
Uk Fullz with VBV + MMN ----->>>>>
4757149145425726|03 / 20|429|ERIN PATTERSON|4 Carsons Dale|Newtownards|Northern Ireland|BT23 5GG|UK|07754740429| DOB 9-4-1998 |account number 9382450401 |short code 09-01-28 |MMN McCormick |VBV bubbles\par
Uk Fullz with CITY----->>>>>
I have over 100k fullz, SO i can filter anycity u want
Uk Fullz with NATIONAL INSURANCE ----->>>>>
+ ---------------DVLA----------------+
+ Personal Information
+ ------------------------------------------+
| Email Address: shannon.lee96@hotmail.com
| First Name: Shannon
| Last Name: Lee
| Address: 393 Beaumont Leys Lane
| County: Leicestershire
| Postcode: LE4 2BG
| Date of Birth (dd/mm/yyyy): 26/12/1996
| Mobile/Telephone Number: 07833495581
| Driver License Number:
| National Insurance Number: Jw 44 64 72 a
| Account Number: 46691713
| Sort Code: 09-01-28
+ ------------------------------------------+
+ Card Information
+ ------------------------------------------+
| Cardholder Name: S m Lee
| Card Number: 4757147329496307
| Expiry Date: 05/21
| CVV: 865
+ ------------------------------------------+
+ Bank Information
+ ------------------------------------------+
| Santander Customer ID: S m lee
| Santander Passcode: harry2803
| Santander Password: harry2803
| Santander Memorable Word: Harrybirthday
Uk Fullz with Driver License ----->>>>>
+ Personal Information
+ ------------------------------------------+
| Email Address: obrien50@gmx.co.uk
| First Name: Rose
| Last Name: O'brien
| Address: 15 Snowdon Drive, Fforestfach
| City: SWANSEA
| County: Swansea
| Postcode: SA5 5BD
| Date of Birth (yyyy/mm/dd): 23/07/1960
| Mobile/Telephone Number: 7480133262
| Driver License Number: OBRIE657230RA9VU
+ ------------------------------------------+
+ Card Information
+ ------------------------------------------+
| Cardholder Name: Rose O'brien
| Card Number: 4659352514485102
| Expiry Date: 04/23
| CVV: 632
| Account Number: 38732381
| Sort Code: 07-04-36
| MMN: Davies
Also if you request anything in FULLZ we still meet
ALL OF THEM ARE FRESH FULLZ DEAD AND NOT RESOLD.
Please contact me
ICQ 713086896
Telegram @selldeadfullz
#deadfullz
#fullzdead
#uk
#deadfullzuk
#fullzdeaduk
#selldeadfullz
#buydeadfullz
#ukdeadfullz
#ukfullzdead
Whatsapp: +16465806302) Buy counterfeit euros, pesos, dollars, pounds. https://darkwebdocuments.net/ Buy driver's license, ID cards, passports, Buy Clone credit cards.
We deal and specialize in helping you to get high-quality Biometric documents, registered PASSPORT, DRIVING LICENSE, ID CARD, VISA, SSN TOEFL, IELTS, IDP, ESOL, GMAT CELTA/DELTA, DEGREE, DIPLOMAS & other Certificates. 100% undetectable counterfeit euros, pesos, dollars, pounds, and many other currencies. Buy Clone credit cards, credit card clone
https://darkwebdocuments.net/
WhatsApp..............................+16465806302
https://wa.me/16465806302
Contact..............darkwebdocuments@gmail.com
Skype............... freevisa334
https://www.facebook.com/RegistereddocumentsSSDchemicalsolution?mibextid=LQQJ4d
Buy SSD Chemical solution for cleaning all types of banknotes. We are the best and Unique producer of HIGH-QUALITY Undetectable Counterfeit Banknotes, with over billions of our products circulating around the world. We supply only original high-quality counterfeit currency NOTES to all countries worldwide.THESE BANKNOTES ARE HIGHLY INDISTINGUISHABLE TO THE TOUCH AND THE FEEL OF THE HANDS AND LOOK OF THE NAKED EYES. THIS MONEY CARRIES INDIVIDUAL SERIALS AND BYPASS ALL SECURITY TEST INCLUDING UV - LIGHT AND IODINE COUNTERFEIT PEN MARKER.
BUY BIOMETRIC PASSPORT, DRIVING LICENSE, ID CARD, VISA, SSN
We have years of experience producing original quality real registered passports, ID's, drivers licenses and many other identity documents, really cheap for all countries such as ; Switzerland, United Kingdom, United States, Spain, Sweden, Australia, Austria, Canada, Chile, Denmark, Ecuador, Finland, France, Germany, Israel, New Zealand, South Africa, e.t.c.
Passports with chip for the following countries are also available for : Australia, Austria, Finland, Germany, Malaysia, Netherlands, Sweden, Switzerland, Thailand, United Kingdom, United States, e.t.c.
We can also produce documents such as work permit, for UK, USA, Italy just to name a few.
Buy biometric Passport, id cards, Visa, Drivers License, Toefl, Ielts, Toeic, Celta/Delt
BUY fake British passports (UK), Americans, Canadians
False identity CARDS ONLINE IN UNITED STATES, DRIVING LICENSE
Buy Registered birth certificates
BUY Real DRIVING LICENSE
Buy Real EU/USA/UK/Canadian Passports,Driver’s License,ID Cards,Visas, USA Green Card and Citizenship.
buy original / fake passports, Drivers license, ID cards, birth certificates, diplomas, university degrees etc
BUY HIGH QUALITY REAL PASSPORT,ID CARDS,DRIVING LICENSE, MARRIED, passport,visa ,France driver license, id cards,diplomas,birth certificates ETC
Buy Visa, passport, id card, birth certificate, Driving License Transcripts
Buy Original Passports ,Id Card Drivers License
Best Quality Novelty real IDs and Passports,Marriage certificates and Drivers license etc buy now high quality-We have the best HOLOGRAMS AND DUPLICATING MACHINES With over 13million of out documents circulating over the world.-IDs Scan-yes...-HOLOGRAMS: IDENTICAL-BAR CODES: IDS SCAN-UV: YESIDS WITH FAST SHIPPING
https://darkwebdocuments.net/
WhatsApp..............................+16465806302
https://wa.me/16465806302
Contact..............darkwebdocuments@gmail.com
Skype............... freevisa334
We guarantee and offer high quality counterfeit bills for the following currencies;
EUR – Euro
USD – US Dollar
GBP – British Pound
INR – Indian Rupee
AUD – Australian Dollar
CAD – Canadian Dollar
AED – Emirati Dirham
ZAR – Rand
CHF – Swiss Franc
CNY – Chinese Yuan Renminbi
MYR – Malaysian Ringgit
THB – Thai Baht
BUY PASSPORT | PASSPORT ONLINE | PASSPORTS FOR SALE | ID CARD ONLINE | BUY DRIVING LICENSE | BUY ID CARD | DRIVERS LICENSE ONLINE | BUY IELTS CERTIFICATE ONLINE | AUSTRALIA DOCUMENTS | BELGIUM DOCUMENTS | CANADA DOCUMENTS | GERMANY DOCUMENTS | FRANCE DOCUMENTS | NETHERLANDS | DOCUMENTS | ITALY DOCUMENTS | SPAIN DOCUMENTS | PORTUGAL DOCUMENTS | USA DOCUMENTS | UNITED KINGDOM DOCUMENTS | BUY REAL CANADIAN PASSPORT | BUY REAL USA PASSPORT | ID CARD USA | BUY PASSPORT CANADA | BUY US ID CARD | BUY REAL US PASSPORT ONLINE |
#celpip, PTE, CISSP CERTIFICATE #Ielts, Buy #(ISC) ², #CISSP, #SSCP, #CCSP, #CAP, #CSSLP, #HCISPP, #CISSP- #ISSAP, #CISSP- #ISSEP, #CISSP- #ISSMP, #CBK #CHST, #BCSP #TOEFL, #Nclex, #BBA, #BBM, #BCA, #PMP, #PMC, #IELTS, #PTE, #CELPIP, #NEBOSH, #CISSP, #CRISC, #CISM, #PMP, #CEH, # #CSM, #GRE - #(ISC) ², #CISSP, #SSCP, #CCSP, #CAP, #CSSLP, #HCISPP, #CISSP- #ISSAP, #CISSP- #ISSEP , #Toefl, #Pte, #Esol, #Toiec, #Oet, #Gmat, #Gre, #Nebosh, #SAT, #ACT, #GED, #Usmle, #Psat, #lsat, #Celban
You can contact us directly to get the additional information and place the order...
https://darkwebdocuments.net/
WhatsApp..............................+16465806302
https://wa.me/16465806302
Contact..............darkwebdocuments@gmail.com
Skype............... freevisa334.